The Static IP address below is the GIS configuration for the LAN1 on units above the GIS-R6. To set up an access point, please check on the manual what is the IP address and Subnet mask provided.

  • Click on the Apple icon on the upper-left corner of the screen and click System Preferences

  • Open Network

  • On the Wi-Fi tab click on Advanced

  • Click on the TCP/IP tab
    • Configure IPv4: Manually
    • IPv4 Address: On the range of the LAN port being used, to see default range click here
    • Subnet Mask:
    • Router:
    • Click OK